Glass-lined vs stainless vs PTFE vs Hastelloy
Four materials cover most reactor duties. The medium decides which one, not the price list.
What each one is for, and where it fails
| Material | Fits | Fails on | Relative cost |
|---|---|---|---|
| Glass-lined steel | Hydrochloric and most mineral acids, chloride media, pharma and dye intermediates | HF, fluoride-bearing media, hot concentrated alkali, thermal shock | Low to medium |
| 316L stainless | Clean media, food and pharma with no chloride present | Chloride pitting, acidic service, iron pickup in the batch | Low |
| PTFE-lined | Broad acid and solvent resistance where glass would chip | Vacuum and high temperature together, mechanical damage | Medium to high |
| Hastelloy C276 | Chlorides under oxidising and reducing duty, high temperature | Cost. Very few duties justify it | High |
Cost order is indicative only. A real quotation depends on volume, pressure, jacket type and agitator.
How we decide
We ask three things before recommending anything: the medium and its concentration, the working temperature, and whether the vessel has to take thermal shock. Glass lining wins on acids and loses on fluorides and hot alkali. If your medium contains fluoride, we will tell you glass is wrong and quote something else.
The material is only half of it. Jacket type, agitator and seal decide whether the vessel works in practice. We specify those as a system against your duty.
Send the medium, the temperature and the volume. We answer with the material that fits.